30
8.2. Display unit
8.2.1. Remove the Speakers (L, R)
1. Remove the Speaker cables (L, R).
2. Remove the screws (×4 ) and remove the Speakers
(L, R).
3. Remove the screws (×4 ) and remove the Speaker
mounting brackets (LT, RT, LB and RB).
8.2.2. Remove the Pedestal stand
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the screws (×4 ) and remove the Stand cover.
3. Remove the screws (×4 ) and remove the Pedestal
stand.
4. Remove the screws (×4 ) and remove the Stand holder
(L, R).
To Next Page
Loading...
