Panasonic TH-P54Z1D

27
8 Disassembly and Assembly Instructions
8.1. Tuner box
8.1.1. Remove the Top case
1. See Service Hint (Section 3.1.1.)
8.1.2. Remove the Rear panel
1. Remove the screws (×4 , ×4 , ×2 )
2. Remove the Rear panel.
8.1.3. Remove the Q-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Disconnect the connector (P1).
2. Disconnect the bridge connector (A10-P9).
3. Remove the screws (×4 ) and remove the Q-Board.
4. Remove the Q-board barrier.
8.1.4. Remove the Front panel assy
1. Remove the claws (×2 , ×2 , ×3 ) and remove
the Front panel assy.
8.1.5. Remove the K-Board
1. Remove the Front panel assy. (See section 8.1.4.)
2. Remove the screws (×3 ).
3. Disconnect the connector (K12) and remove the K-Board.
8.1.6. Remove the G-Board
1. Remove the Front panel assy. (See section 8.1.4.)
2. Remove the screws (×6 , ×1 ) and remove the
Front terminal shield.
3. Remove the screws (×2 ) and remove the Terminal
rear shield.
4. Disconnect the bridge connectors (A51-G51 and A52-
G52).