37
Set the bypass selector to “Unpurified” or “Shower”.
[Bypass selector as seen from below]
Using the unpurified water (tap water) By “unpurified water” is meant here the untreated tap water.
The table on the right shows the temperatures
at which water can be used by the Alkaline
Ionizer. Use water at these temperatures
(otherwise trouble may result).
Important
Bypass selector
The water comes straight out. The water comes out as a shower.
Unpurified water
shower holes
Source water
opening (straight)
Position of bypass selector Water temperature
Purifi ed Under 35 °C
Unpurifi ed
Under 80 °C
Shower
ZGS0TKAS400EXZ.indb 37ZGS0TKAS400EXZ.indb 37 5/11/2010 3:29:00 PM5/11/2010 3:29:00 PM