Panasonic TK-AS41 - What Do the Indicator Lamps Mean

54
What Do the Indicator Lamps Mean?
When the lamps light or blink in any of the following symptoms, take the suggested action described
below. If the lamps light or blink despite the action having been taken, disconnect the power plug, and
consult your dealer. However, in the event that the unit has failed: do NOT attempt to disassemble and
repair the Alkaline Ionizer yourself, but contact your dealer.
The “Alkaline Level 1”, “Purifi ed
Water” and “Acidic Water” water
quality indicator lamps blink at the
same time, and three short beeps
in succession are heard from the
buzzer.
 Depending on the water quality and environment, electrolysis
may be suspended in order to protect the Alkaline Ionizer.
(Purified water will come out of the main spout.)
 Turn off the faucet, wait about 3 minutes, and then resume
use.
►
Cause and remedial actionSymptom
The “Alkaline Level 1”, “Purifi ed
Water” and “Acidic Water” water
quality indicator lamps blink at the
same time, the Generating lamp lights,
and three short beeps in succession
are heard from the buzzer.
 Depending on the water quality and environment, electrolysis
may be suspended in order to protect the Alkaline Ionizer.
(Purified water will come out of the main spout.)
 Turn off the faucet, wait about 3 minutes, and then resume
use.
►
The “Alkaline Level 1”, “Purifi ed
Water” and “Acidic Water” water
quality indicator lamps blink at the
same time, the Continue lamp lights,
and three short beeps in succession
are heard from the buzzer.
 Depending on the water quality and environment, electrolysis
may be suspended in order to protect the Alkaline Ionizer.
(Purified water will come out of the main spout.)
 Turn off the faucet, discontinue use, and wait about
30 minutes. (Depending on the water quality and
environment, you may have to wait more than 30 minutes.)
►
The “Alkaline Level 1”, “Purifi ed
Water” and “Acidic Water” water
quality indicator lamps blink at
the same time, the Water Flow
Adjustment Lamp lights, and three
short beeps in succession are heard
from the buzzer.
 Depending on the water quality and environment, electrolysis
may be suspended in order to protect the Alkaline Ionizer.
(Purified water will come out of the main spout.)
 Turn off the faucet, discontinue use, and wait about
30 minutes. (Depending on the water quality and
environment, you may have to wait more than 30 minutes.)
►
The “Alkaline Level 1”, “Purifi ed
Water” and “Acidic Water” water
quality indicator lamps light at the
same time, the Generating lamp lights
and fi ve short beeps in succession
are heard from the buzzer.
 The Alkaline Ionizer has failed.
 Disconnect the power plug, and consult your dealer.
►
The “Alkaline Level 1”, “Purifi ed
Water” and “Acidic Water” water
quality indicator lamps light at the
same time, the Continue lamp lights,
and fi ve short beeps in succession
are heard from the buzzer.
 The Alkaline Ionizer has failed.
 Disconnect the power plug, and consult your dealer.
►
All the lamps except “Alkaline Level
2” and “Alkaline Level 3” light at
the same time, and fi ve short beeps
in succession are heard from the
buzzer.
 The Alkaline Ionizer has failed.
 Disconnect the power plug, and consult your dealer.
►
ZGS0TKAS400EXZ.indb 54ZGS0TKAS400EXZ.indb 54 5/11/2010 3:29:13 PM5/11/2010 3:29:13 PM