13
Tuning menu ā Programme edit
Note:
When a programme position is locked, Direct Channel Access
using the C and numeric buttons on the remote control is not
available.
Locking a programme channel
Renaming a programme channel
OK
OK
Changing the sound system for a channel
OK
Move to the Name column.
Choose the new character. The box at the bottom of the screen shows
the character currently selected.
Move to the next character position.
Continue until renaming is done.
Press the OK button to store the new name.
You may wish to lock a programme channel to prevent ac cess to it.
Move to the Lock column.
Choose between Lock On or Lock Off.
Press the OK button to store the new setting.
You can change the sound system used for a programme channel.
Move to the Sys column.
Choose the required sound system:
SC1 : PAL B, G, H / SECAM B, G
SC2 : PAL I
SC3 : PAL D, K / SECAM D, K
F : SECAM L / Lā
Press the OK button to store the new setting.
Programme edit
Prog. Chan. Name Lock Sys
1 CH21 ABC Off SC1
2 CH51 XYZ Off SC1
3 CH41 FTP Off SC1
4 CH47 123 Off SC1
5 CH37 456 Off SC1
ABCDEFGHIJKLMNOPQRST
UVWXYZ+- 0123456789
Programme edit
Prog. Chan. Name Lock Sys
1 CH21 ABC Off SC1
2 CH51 XYZ Off SC1
3 CH41 FTP Off SC1
4 CH47 123 Off SC1
5 CH37 456 Off SC1
Programme edit
Prog. Chan. Name Lock Sys
1 CH21 ABC Off SC1
2 CH51 XYZ Off SC1
3 CH41 FTP Off SC1
4 CH47 123 Off SC1
5 CH37 456 Off SC1
To Next Page
Loading...
