Setting Inspection
Voltage Confirmation
Confirm the following voltages:
A board
Description Test point Position Range
30V TP3822 D3865 28V - 32V
12V TP3824 C3864 11,4V – 12,6V
AUDO_15V A1, pin20,21 14V - 16V
8V TP3823 C3858, +pin 7,6V – 8,7V
STBY3.3V TP3817 C3844, +pin 3,2V – 3,45V
STBY1.8V TP3803 C3818, +pin 1,77V – 1,89V
STBY5V TP3813 C3801 4,8V – 5,4V
CEC3.8V TP3814 C1212 3,5V - 4,2V
3V3_HD TP3834 IC3808, pin 5 3V - 3,6V
1V8_HD TP3816 D3890 1,62V - 1,98V
5V_SIG TP3826 C3873 4,83V – 5,25V
10
To Next Page
Loading...
