Self Check
Self-check is used to automatically check the bus lines and hexadecimal code of the TV set. To enter Self-Check mode, keep
pressing the down (-/v) button on the TV set and press the STATUS button on the remote control. To exit Self Check,
switch off the TV set at the power button.
Display Ref.No. Description P.C.B
E2 IC1120 EEPROM A-Board
VCTP IC1501 AUDIO VIDEO PROCESSOR A-Board
TUN TU001 TUNER A-Board
HDMI IC5003 HDMI RECEIVER A-Board
If the CCU