■ DVB-via-IP (DVB-C)
1. Select Frequency / Bandwidth / Modulation Type / Symbol Rate / FEC /
Service ID and set with Cursor buttons or Numeric buttons.
●
Normally set Symbol Rate to Auto.
2. Select Start scan and press OK to search.
■ DVB-via-IP (DVB-T)
1. Select Frequency / Bandwidth / Modulation / FEC / Service ID and set with
Cursor buttons or Numeric buttons.
2. Select Start scan and press OK to search.
= Note =
●
For details of DVB-via-IP connections
Functions > DVB-via-IP > DVB-via-IP client connection
●
Not valid when Client Settings is set to Multicast Environment (DVB-via-IP)
- 119 -
To Next Page
Loading...
