English
9
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Remove the assembly screws
from the TV.
2 Lift up the TV at a slight angle from the pedestal as
shown.
(View from the side)
3 Remove the assembly screws from the bracket.
Connections
External equipment and cables shown are not
supplied with this TV.
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
Check the terminal type and cable plugs are correct
for connection.
Use a fully wired HDMI compliant cable.
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
Please also read the manual of the equipment being
connected.
Removing the cable cover from the
TV
Be sure to remove the cable cover before connecting
or disconnecting cables.
When the connections are completed, attach the
cable cover.
(p. 15)
Cable cover
To Next Page
Loading...
