- 129 -
Using Common Interface
The Common Interface Module menu provides access to software contained
in Common Interface (CI) Modules.
●
This function may not be available in some countries or regions.
●
Video and audio signals may not be output depending on broadcasts or
services.
Although CI module may enable you to view some services, this TV does not
guarantee all services (e.g. encrypted pay-TV channels). Please use only the
broadcaster-approved CI module. Consult the operator / broadcaster or CI
module manufacturer for more information and conditions of the services.
■ Insert the CI module (optional)
●
The features that appear on screen are dependent on the contents of the
selected CI module.
●
Normally encrypted channels will appear. Follow the on-screen
instructions. If encrypted channels do not appear, take the following steps.
●
For more details, read the manual of the CI module, or check with the
broadcaster.
1. Display the TV Selection screen with TV
2. Select the mode with
/ and press OK to set
DVB-C / DVB-T
3. Display the menu with MENU
4. Select Setup
Common Interface with / and press OK to access
5. Select Slot 1: with
/ , press OK and follow the on-screen instructions
●
On-screen instructions may not correspond to the remote control buttons.
Shipping Condition
Shipping Condition
Resets the TV to its original condition (i.e. no channels tuned in).
All settings are reset (channels, picture, sound settings, etc.).
1. Display the menu with MENU
2. Select Setup
System Menu Shipping Condition with / and press
OK to access
●
Child Lock PIN number is required depending on the country. If you
have forgotten your changed PIN, input “6969” as the PIN number.
Functions Child Lock PIN number
3. When the confirmation screen is displayed, select Yes with / and
To Next Page
Loading...
