- 33 -
●
HDMI terminal
Valid input signal format:
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
●
HDMI terminal does not receive WSS signal.
= Note =
●
If the screen size looks unusual when a widescreen-recorded programme
is played back on a VCR, adjust the tracking of the VCR. Read the manual
of the VCR.
Advanced Settings
You can adjust and set up the detailed picture settings for each input when
Viewing Mode is set to True Cinema or Custom.
Watching For best picture Viewing Mode
1. Select the input mode with AV or TV
2. Display the menu with MENU
3. Select Picture
Viewing Mode with / and press OK to access
4. Select the mode with
/ and press OK to set
True Cinema / Custom
■ Adjust the detailed picture settings
1. Display the menu with MENU
2. Select Picture
Advanced Settings Panel Luminance Setting / Adaptive
Gamma Control / Black Expander / Colour Gamut / White Balance / Colour
Management / Gamma with / and press OK to access
3. Set with
/ / / and press OK to store
To Next Page
Loading...
