- 142 -
Pixel Orbiter
(On / Auto)
Selects the mode for wobbling of the image to prevent panel “image
retention”.
Auto:
Automatically works only for the appropriate images and you rarely
recognise the wobbling.
Scrolling Bar
Displays scrolling bar pattern to assist elimination of panel “image retention”.
●
Press OK to start scrolling and press any buttons (except Standby) to exit
this mode.
●
For positive effect to eliminate “image retention”, it may be necessary to
display for a long time.
3D Settings
3D Detection
(On (Advance) / On / Off)
Selects whether to switch to the 3D mode automatically or not.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
●
To view 3D images without any notifications and operations, set to On
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
●
Not valid when 3D Detection is set to On (Advance)
●
For DVB, Component and HDMI input
To Next Page
Loading...
