- 212 -
Functions VIERA Link “HDAVI Control™” Summary of VIERA Link
●
Turn the connected equipment on and then switch the TV on.
Functions VIERA Link “HDAVI Control™”
Recording does not start immediately
●
Check the settings of the recorder. For details, read the manual of the
recorder.
Parts of the TV become hot
●
Even if the temperature of parts of the front, top and rear panels has
risen, these temperature rises do not cause any problems in terms of
performance or quality.
Overcurrent error message appears
●
The connected USB device may cause this error. Remove the device and
turn the TV off with Mains power On / Off switch, then turn it on again.
●
Check foreign objects are not inside the USB port.
An error message appears
●
Follow the message’s instructions.
●
If the problem persists, contact your local Panasonic dealer or the
authorised service centre.
Built-in Camera does not work
●
Ensure the built-in Camera is held up. When the application for camera
operation is activated, the built-in Camera automatically pops up.
●
Face recognition may not work properly depending on surrounding
environment or condition (for example, darkened room, etc.).
The touch pad controller does not work or cannot be registered
●
Are the batteries installed correctly?
●
The batteries may be running low. Replace them with new ones.
To Next Page
Loading...
