Assembling the Optional Stand (KX-B061)
16
■ Assembly
1
Assembling the stand
■ Assembling the fall-prevention extension legs
The fall-prevention extension legs increase the safety of the electronic board.
• Install and always set the fall-prevention legs when using the stand.
• When tightening the screw , hold the nut with pliers.
Note
• When folding back the fall-prevention extension legs to release the lock, perform as follows.
■ Inserting the covers to the pipes
Fall-prevention extension legs
• Caster locks are attached to
the back side.
Caution
1
1
2
UB-5325_IM_EN.book 16 ページ ２００８年１月８日 火曜日 午後５時７分
To Next Page
Loading...
