Assembling the Electronic Board
4
■ Assembly
1
Assemble the optional stand or wall-mounting kit.
■ If you are using a stand, refer to page 15.
■ If you are using a wall-mounting kit, refer to page 19.
2
Remove the electronic board from the shipping box.
Remove the joints, then remove the electronic board from the shipping box.
• When removing the screen unit, grasp the metal frames on both sides of the screen.
Do not grasp the screen film surface, as this may scratch it.
• The shipping box, cushioning material, and other packing material will be necessary if you ever need to
repackage the electronic board, so do not throw them away.
Manuals, CD-ROM
Markers
Eraser
Thermal transfer film
Power cord
Lower frame cover
Upper frame cover
Screen fastening brackets
Wrench
Hexagonal screws
Wing bolts
Scanner / printer unit
Screen unit
Joints
Joints
[UB-5325]
Shipping box
Shipping box
Caution
UB-5325_IM_EN.book 4 ページ ２００８年１月８日 火曜日 午後５時７分
To Next Page
Loading...
