Panasonic UF-8300 - Page 230

230
UF-7300/7200
UF-8300/8200
11 Error : <Programmed ABBR overwrite
prohibited. Use open ABBR only.>
Cannot overwrite existing programmed data, use the
“Delete” command to erase the existing data first.
12 Permission denied : <Password is
incorrect.>
Correct the password and try again.
13 Permission denied : <158 PC Remote
Dialer Update parameter is set to
“Invalid”.>
Set the PC Remote Update parameter to “Valid”.
14 Format Error : <error line> The format of the Entry is incorrect / incomplete or the data
string for each station is not defined within a single line.
15 Warning : <error line> The format of the Entry is incorrect or the number of
characters entered, exceed the maximum allowed in the
field. Correct it and try again.
16 Warning : Field limit exceeded<error
line>
The maximum number of Station Name, Domain Name,
Sender Name, Program Name, etc. were exceeded.
Error Message Possible Cause / Action