Panasonic UF-8300 - Page 70

70
UF-7300/7200
UF-8300/8200
5. Perform the Service Mode F2 (Single Copy Test).
6. Check the Image size of the Copy and the Original as Portrait.
7. Perform the Service Mode F6-91 (Original Read Edge ADF), to adjust the ADF Original Read Edge.
8. If the gap is less than the Original, input a (+) value. If bigger than the Original, input a (-) value.
9. Perform the Service Mode F6-90 (ADF Image Read Start), to adjust the ADF Main Scan for Side
position.
10. If the gap is less than the Original, input a (+) value. If bigger than the Original, input a (-) value.
11. Press the “Stop” key first and press the “Function”, “Clear” keys sequentially to exit the Service
Mode.