Panasonic VDR-D100EB - Dividing a Scene

Editing
Editing scenes
69
LSQT1048
(RAM) (-RW‹VR›)
To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary
portion.
¬Rotate the mode dial to select .
1 Press the MENU button, then select
[ EDIT SCENE] # [ DIVIDE] and press the
joystick.
2 Select the scene to be divided, then press the
joystick.
The selected scene is played back.
3 When you reach the area where you want to divide
the scene, move the joystick down to set the
dividing point.
≥ Using slow-motion playback or frame-by-frame playback makes it easy
to search for the point where you want to divide the scene. (l 63)
4 When the confirmation message appears, select [YES], then press the
joystick.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
Dividing a scene
This is for dividing a scene into two.
LSQT1048(ENG).book 69 ページ ２００６年２月６日 月曜日 午後２時１３分