Editing
Using playlists
72
LSQT1048
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select .
1 Press the MENU button, then select
[PLAYSETUP] # [PLAYMODE] # [PLAYLIST]
and press the joystick.
2 Select [CREATE], then press the joystick.
3 Select the scene to be added to the playlist, then
press the joystick.
The selected scene is encircled by a yellow frame.
≥ When the joystick is pressed again, the selected scene will be cancelled.
≥ Up to 8 scenes can be set in succession.
≥ The scenes are registered in the playlist in the order that they were
selected. After creating a playlist, the order of the scenes in it can be
changed by [MOVE] function. (l 75)
4 Press the MENU button.
5 When the confirmation message appears, select [YES], then press the
joystick.
The thumbnail view screen of the created playlist is displayed.
To add another scene to the same playlist
Select [ADD]. (l 74)
To playback a playlist
Select the scene to start playback, then press the joystick.
Creating a new playlist
LSQT1048(ENG).book 72 ページ ２００６年２月６日 月曜日 午後２時１３分
To Next Page
Loading...
