Panasonic Viera TC-L32DT30

46
Editing and Setting Channels
Auto program (Set automatically)
Automatically searches and adds available channels to the memory.
Select “ANT in”
Select “Cable” or “Antenna”
Or select “Not used”.
Select “Auto program”
next
select
Menu
Cable
ANT/Cable setup
ANT in
Auto program
Manual program
Signal meter
Select a scanning mode (p. 14)
OK
select
Menu
Auto program
All channels
Analog only
Digital only
●
After the scanning is completed, select “Apply”.
(see p. 47 ).
●
All previously saved channels are erased.
Press to exit from
a menu screen
Display the menu
Select “Setup”
Menu
Setup
1/2
ANT/Cable setup
Input labels
Network settings
VIERA Link settings
Channel surf mode
Language
Clock
All
3D settings
next
select
Select “ANT/Cable setup”
Menu
3D settings
Setup
1/2
ANT/Cable setup
Input labels
Network settings
VIERA Link settings
Channel surf mode
Language
Clock
All
next
select
The current channel settings can be changed according to your needs and reception conditions.
ANT/Cable setup and operation
tcL3237dt30eng0619.indb46tcL3237dt30eng0619.indb46 2011/02/1710:18:432011/02/1710:18:43