Panasonic Viera TX-L32DT35E - HDMI and DVI Connection Details; HDMI Connection Features and DVI Procedure; PC Connection Guide

Technical Information
115
HDMI connection
HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-
compression standard.
HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment.
HDMI-compatible equipment
∗
1
with an HDMI or DVI output terminal, such as a DVD player, a set top box or a game
equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
A bout connections, see “External Equipment” (p.108).
Applicable HDMI features
•
I nput audio signal :
2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)
•
I nput video signal :
480i, 480p, 576i, 576p, 720p, 1080i and 1080p
“Input signal that can be displayed” (p.117)
M atch the output setting of the digital equipment.
•
I nput PC signal :
“Input signal that can be displayed” (p.117)
M atch the output setting of the PC.
•
VIERA Link (HDAVI Control 5)
[VIERA Link] (p.102)
•
3D
•
C ontent Type
•
D eep Colour
•
Audio Return Channel
∗
2
(HDMI2 terminal only)
DVI connection
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable
∗
3
. When the
DVI to HDMI adaptor cable is used, connect the audio cable to AUDIO IN terminals.
Note
•
Audio settings can be made on the [HDMI1 / 2 / 3 / 4 Input] in the Sound Menu. (p.40)
•
If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
•
T hese HDMI connectors are “type A”.
•
T hese HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
•
Equipment having no digital output terminal may be connected to the input terminal of “COMPONENT” or “VIDEO” to receive
analogue signals.
•
T his TV incorporates HDMI™ technology.
∗
1 : The HDMI logo is displayed on HDMI-compliant equipment.
∗
2 : Audio Return Channel (ARC) is a function to be able to send digital sound signals via an HDMI cable.
∗
3 :
Enquire at your local digital equipment retailer shop.
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
•
PC signals that can be input : Horizontal scanning frequency 31 to 69kHz; vertical scanning frequency 59 to 86Hz (more than
1,024 signal lines could result in incorrect display of the image).
•
A PC adaptor is not necessary for the DOS/V-compliant D-sub 15-pin connector.
Note
•
Some PC models cannot be connected to this TV.
•
When using PC, set the colour display quality of PC to the
highest position.
•
F or details of the applicable PC signals
“Input signal that can be displayed”
(p.117)
•
M ax. display resolution
4:3 1,440 × 1,080 pixels
16:9 1,920 × 1,080 pixels
•
D-sub 15-pin connector signal
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
R GND (Ground) NC (not connected)
G GND (Ground) NC (not connected)
B GND (Ground) HD
NC (not connected) NC (not connected) VD
GND (Ground) GND (Ground) NC (not connected)