Watching External Inputs
27
Watching External Inputs
C onnect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.
•
T o connect the equipment (p.11, 12, 108 - 110)
T he remote control is capable of operating some functions of selected external equipment.
“Operating the equipment with the TV remote control” (p. 28)
1
Turn the TV on
When connecting with SCART as example 2 or 3 (p.11, 12)
R eceives input signals automatically when playback starts
•
I nput signals are automatically identified by the SCART (pin 8) terminal.
•
T his function is also available for HDMI connections (p.108).
If input mode is not switched automatically
P erform
2
and
3
•
C heck the setup of the equipment.
2
Display the input selection menu
AV
3
Select the input mode connected to the equipment
AV1
AV2
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Input Selection
SD Card/USB
select
watch
•
Y ou can also select the input using the AV button on the remote control or the side
panel of the TV (except [SD Card/USB]).
Press the button repeatedly until the desired input is selected.
•
[ SD Card/USB] : Switches to Media Player “Using Media Player” (p.75)
•
Y ou can label or skip each input mode (except [SD Card/USB]). “Input Labels” (p.61)
Skipped inputs will not be displayed when the AV button is pressed.
4
View
AV1
D isplays the selected mode
Note
•
If the external equipment has an aspect adjustment function, set it to “16:9”.
•
F or details, see the manual of the equipment or ask your local dealer.
■
To return to TV
TV
To Next Page
Loading...
