Technical Information
117
Input signal that can be displayed
COMPONENT (Y, PB, PR), HDMI
Signal name COMPONENT HDMI
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
Mark : Applicable input signal
PC (from D-sub 15P)
Signal name Horizontal frequency (kHz) Vertical frequency (Hz)
640 × 400 @70 Hz
31.47
70.07
640 × 480 @60 Hz
31.47 59.94
640 × 480 @75 Hz
37.50 75.00
800 × 600 @60 Hz
37.88 60.32
800 × 600 @75 Hz
46.88 75.00
800 × 600 @85 Hz
53.67 85.06
852 × 480 @60 Hz
31.44 59.89
1,024 × 768 @60 Hz
48.36 60.00
1,024 × 768 @70 Hz
56.48 70.07
1,024 × 768 @75 Hz
60.02 75.03
1,024 × 768 @85 Hz
68.68 85.00
1,280 × 768 @60 Hz
47.70 60.00
1,280 × 1,024 @60 Hz
63.98 60.02
1,366 × 768 @60 Hz
48.39 60.04
M acintosh13” (640 × 480)
35.00 66.67
M acintosh16” (832 × 624)
49.
73 74.55
M acint
osh21” (1,152 × 870)
68.68 75.06
A pplicable input signal for PC is basically compatible to VESA standard timing.
PC (from HDMI terminal)
Signal name Horizontal frequency (kHz) Vertical frequency (Hz)
640 × 480 @60 Hz 31.47
60.00
1,280 × 720 @60 Hz 45.00 60.00
1,920 × 1,080 @60 Hz 67.50 60.00
A pplicable input signal for PC is basically compatible to HDMI standard timing.
Note
•
Signals other than above may not be displayed properly.
•
T he above signals are reformatted for optimal viewing on your display.
•
PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient clarity.
To Next Page
Loading...
