Panasonic Viera TX-L32DT35E - Displaying PC Screen on TV; Selecting PC Input and Settings

Displaying PC Screen on TV
67
Displaying PC Screen on TV
T he screen of the PC connected to the TV can be displayed on the TV.
Y ou can also listen to PC sound with the audio cable connected.
•
T o connect PC (p.109)
1
Select the external input
AV
2
Select [PC]
AV1
AV2
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Input Selection
SD Card/USB
access
select
•
C orresponding signals (p.117)
•
If [H-freq.] or [V-freq.] is shown in red, the signals
may not be supported.
■
To return to TV
TV
PC menu setting
•
T o make settings “How to Use Menu Functions” (p. 35)
Menu Item Adjustments / Configurations (options)
Setup
PC Setup
Input Resolution
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels), XGA (1,024 × 768 pixels),
WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
O ptions change depending on signals
Clock Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
Sync
C hooses another synchronous signal if the image is distorted
[H & V] / [On Green]
[H & V] : by the horizontal and vertical signals from your PC
[On Green] : by the green signal from your PC (if available)
Reset to Defaults Press the OK button to reset to the default PC Setup settings
•
O ther items (p.36-45, 69)
Note
•
F or HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable
(p.115).