Advanced Picture Settings
69
Lock the picture setting [Lock Settings]
[White Balance], [Colour Management] and [Gamma] can be locked for each Viewing Mode and each input.
Additionally, [Contrast], [Brightness], [Colour], [Sharpness], [Tint] and [Reset to Defaults] in the Picture Menu can be
locked for [Professional1] and [Professional2].
1 Enter the PIN number (4 digits) 2 Select [Adjustment Lock] and set to [On]
* * * *
Please enter new PIN
PIN
Lock Settings-PIN Entry
Change PIN
On
Adjustment Lock
Lock Settings
select
access / store
●
Enter the PIN number twice at first setting.
●
Make a note of the PIN number in case you forget it.
■ To change the PIN number
1. Select [Change PIN] 2. Enter a new PIN number twice
Change PIN
On
Access
Adjustment Lock
Lock Settings
select
access
Copy the settings to the other input [Copy Adjustment]
You can copy the selected [Professional1] or [Professional2] settings to that of the other input.
The settings of [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [White Balance], [Colour Management] and
[Gamma] will be copied.
Select the destination to copy to
Destination All
Copy Adjustment
select
access / store
●
You cannot copy to the locked mode.
To Next Page
Loading...
