On-screen messages
109
Message Meaning / Action
Timer already expired !
●
The starting time in Timer Programming has already passed. Set the timer
correctly (p. 54).
Timer incorrect !
●
Set the start and end times in Timer Programming correctly (p. 54).
Timer overlap.
Press OK to keep, RETURN
to edit.
●
Timer programming events are overlapped. Press the OK button to keep the
overlapped setting. [Ext Rec.] and [USB HDD Rec.] are given priority over
[Reminder]. When two or more [Ext Rec.] / [USB HDD Rec.] overlap, the first
timer programming event starts and finishes as programmed. The next timer
programming event can then start.
Tuner Locked
Press EXIT to unlock and stop
recording
●
If you want to unlock the tuner, cancel Direct TV Recording (p. 87, 89), the
recording of Timer Programming (p. 54) or One Touch Recording.
Unable to download, please
check equipment
●
The tape or disc is active. Stop the equipment and try again.
3D image not available.
●
You may use a function not available for 3D effect. Exit the function to view the
3D images.
■ Media Player / Network
Message Meaning / Action
An internal error occurred.
●
Check the settings. (p. 78 - 81)
Cannot read file
●
The file is broken or unreadable. Check applicable data format. (p. 97, 98)
Communication with the
server failed.
●
This might be a problem of the media server.
Read the manual of the server software.
Connection to the server failed.
●
Check the connections and settings. (p. 77 - 81)
Ethernet cable not connected
●
Check the connection of the LAN cable. If you use a hub, also check the light
on the hub is lit.
●
The LAN cable might be defective.
No Device Inserted
●
Confirm the SD Card or USB device is inserted correctly.
No valid file to play
●
The card has no data.
Server not found
●
There are no available media server on your home network.
Check the connections and settings. (p. 77 - 81)
The software update is not
completed.
●
Network download failed. Check the connections and settings. (p. 77 - 81)
This operation is not possible
●
The selected operation is not available.
To Next Page
Loading...
