To Next PageTo Next PageHow to reduce noise on Panasonic Intercom System?
If you're experiencing noise or feedback on your Panasonic Intercom System, it might be because you are too close to the other party. Try moving away from them.
Why won't the charge indicator light up on my Panasonic Intercom System?
If the charge indicator doesn't light up when you place the sub monitor on the charger for your Panasonic Intercom System: * Ensure the AC adapter is firmly plugged into the power outlet. * Make sure the sub monitor is securely placed on the charger. * If the batteries are new or discharged, leave the sub monitor on the charger for a few minutes.
Why doesn't the charge indicator turn off on my Panasonic Intercom System?
If the charge indicator on your Panasonic Intercom System doesn't turn off after charging the batteries for about 8 hours: * Ensure the main monitor is turned on and charge the sub monitor nearby. The charging time may increase if the sub monitor is picked up or used during charging, or if the main monitor is turned off.
Why is the image in black and white on my Panasonic Intercom System?
If the image of the subject is displayed in black and white (or bluish-purple) on your Panasonic Intercom System, it could be due to poor lighting. If it is night or there is poor light in the area around the doorphone, turn on the LED lights. If you are using a doorphone not equipped with LED lights, consider installing extra lights.
How to turn off demo mode on Panasonic Intercom System?
If your Panasonic Intercom System displays “Demo mode” on the screen, the ringtone regularly sounds, and you cannot talk or make calls, the “Demo mode” feature is enabled. Set “Demo mode” to “Off”.
General| Camera | Yes |
|---|---|
| Number of Units | 1 |
| Audio | Yes |
| Power Source | AC Adapter |
| Type | Wireless Video Intercom System |
Critical warnings and precautions for safe operation to prevent injury or damage.
Basic safety precautions to reduce risks of fire, electric shock, or personal injury.
Identifies and describes the buttons and features of the doorphone and monitors.
Procedure for receiving and responding to calls from the doorphone.
Methods for automatically or manually recording images from the doorphone.
Configuration and operation of electric locks connected to the main monitor.
Procedure for adding and registering sub monitors and extension monitors.
Resolving problems related to distorted, discolored, or unclear monitor images.
Solutions for ringtone not sounding or call sound cutting out.
Addresses sub monitor charging problems and other operational issues.
Explains error messages displayed on the main monitor and their solutions.
Explains error messages displayed on the extension monitor and their solutions.
Explains error messages displayed on the sub monitor and their solutions.
