Products, functions and technical data
Monobloc system
Easy operation
Easy maintenance
and assembly
• control is by means of a wired controller inside the building
(15 m cable)
• simple programming via the controller
• Aquarea monobloc unit is equipped for safety reasons with
FI-circuit breakers:
- 2 FI RCD circuit breakers for 5, 6 and 9 kW units
- 3 FI RCD circuit breakers for 12, 14 and 16 kW units
only required on Phase-out models C,D & E series
• Monobloc system, no special space requirement inside the building,
no refrigerant connections
• easy opening of the unit for maintenance work
Supply water
temperature (°C)
Outside
temperature (°C)
Cooling mode
1
Maximum 20 43
Minimum 5 16
Heating mode
Maximum 55 / 65
2
35
Minimum 25 -20
3
1
valid for models with cooling mode
2
valid for Aquarea HT
3
If the outside temperatures drop below the specied value, the heating
capacity decreases signicantly. This can lead to the shutdown of the unit
due to internal safety functions.
To Next Page
Loading...
