18
Menu Default Setting Setting Options / Display
5.13
External error signal
No
5.14
Demand control
No
5.15
SG ready
No
Yes
120 %
Capacity (1) & (2) of
Buffer Tank and DHW
Tank (in %)
5.16
External compressor SW
No
5.17
Circulation liquid
To select whether to circulate
water or glycol in the system.
Water
5.18
Heat-Cool SW
No
5.19
Force heater
To turn on Force heater either
manually (by default) or
automatically.
Manual
6 Installer setup Operation setup
To access to the four major
functions or modes.
4 main modes
Heat / *
1,
*
2
Cool / *
1,
*
2
Auto / Tank
Menus
For installer
*1
The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).
To Next Page
Loading...
