J
James NelsonSep 10, 2025
Why is my Panasonic WH-SXC12K9E8 Heat Pump operation delayed a few minutes after restarting?
- DDaniel RuizSep 10, 2025
The delay after restarting your Panasonic Heat Pump is a protection mechanism for the compressor.
To Next PageTo Next PageWhy is my Panasonic WH-SXC12K9E8 Heat Pump operation delayed a few minutes after restarting?
The delay after restarting your Panasonic Heat Pump is a protection mechanism for the compressor.
What does it mean if *1, *2 COOL mode is unavailable on my Panasonic WH-SXC12K9E8?
If *1, *2 COOL mode is unavailable on your Panasonic Heat Pump, the system has been locked to operate in HEAT mode only.
Why is there loud refrigerant noise for several minutes in my Panasonic Heat Pump?
The loud refrigerant noise in your Panasonic Heat Pump is caused by protection control during de-ice operation when the outdoor ambient temperature is lower than -10 °C.
General| Type | Air-to-Water Heat Pump |
|---|---|
| Heating Capacity | 12.00 kW |
| Refrigerant | R32 |
| Dimensions (Outdoor Unit) (HxWxD) | 996 x 980 x 370 mm |
| Max Flow Temperature | 60°C |
| IP Rating (Outdoor Unit) | IPX4 |
| Energy Efficiency Class | A++ |
| Power Supply | 230V, 1-phase, 50Hz |
Description of the air-to-water heatpump system components and their interconnections.
Specifies the operational temperature ranges for heating and cooling modes.
Covers general unit warnings, power supply safety, and specific precautions for R32 refrigerant.
Details safe practices for installation, servicing, and equipment checks.
Safe practices for refrigerant removal, evacuation, charging, and decommissioning.
Explains the remote controller's buttons, display, and indicators for operation.
Guides through initial setup, including language selection and clock configuration.
Covers user settings like function setup, system check, personal setup, and service contacts.
Installer configuration for system parameters, zones, sensors, and connectivity.
Installer configuration for heating, cooling, auto modes, and tank operations.
Installer configuration for pump, dry concrete, and service contact details.
Guides users on identifying common issues and performing initial checks.
Provides a list of system error codes and their explanations for diagnosis.
Clarifies the meaning of various symbols used throughout the manual.
