Panasonic Whisper-Lite FV-08VQL4

4. Replacement Guide
1. Remove the primary light kit grille.Remove
grille by pulling down one mounting spring.
Then pull down the other mounting spring.
(Squeeze mounting spring and pull down
carefully) (Fig.1)
2. Unfasten 2 screws (ST4.2X16) and 1 machine
screw (M4X8) from fan unit. Hold the lighting
unit, and remove the plug connectors from the
receptacle respectively.(Fig 2)
Fig.2
Ceiling
Lighting unit
Machine screw
(M4X8)
Plug connector
2 screws(ST4.2X16)
Fig.3
Plug connector
Receptacle
Plug connector
Light lead
wire assy B
Receptacle
Fig.1
Grille
Glove
Mounting
spring
Slot
Disconnect power source before working
on unit.
3. Take out the light lead wire assembly B from
accessories, and connect the light lead wire
assembly B to junction box.(Fig.3)
Receptacle
CAUTION
CAUTION
INSTALLATION
IMPORTANT:
Remove the tapes from grille and springs before
installing new light kit grille as shown below:
Fig.4
Light cover
Remove screw
(M4X8)
3
Fig.5
Fig.6
Secure screw
(M4X8)
Fluorescent
lamp
Night lamp
Light kit cover
assembly
4.Take out the new light kit grille.Remove
screw (M4X8). Remove light kit cover assemby. (Fig.4)
5. Install the night lamp and fluorescent lamps.
(Fig.5)
6. Install light kit cover assembly. (Fig.6)
FFV3420057S
Tapes
16