Panasonic WV-CM2000 - System Connections

-6-
SYSTEM CONNECTIONS
1. Single Monitor Connection
• Connect the coaxial cable between the S-Video
Output connector of the camera or VTR and the S-
Video Input Connector (22) or (27) of this monitor.
• Connect the coaxial cable between the Video Output
connector of the camera or VTR and the Video Input
Connector (32) or (37) of this monitor.
• Set the S-Video Termination Switch (24) or (29) to
75Ωposition.
• Set the Video Termination Switch (34) or (39) to 75Ω
position.
• Connect the coaxial cable to the Standby Input
Connector (42) when the Standby On/Off mode is
selected by the external signal.
2. Multiple Monitor Connection
• Connect the coaxial cable between the S-Video or
Video Output terminal of the camera or VTR and the S-
Video or Video Input Connector (22), (27), (32) or (37)
of this monitor.
• Connect the coaxial cable between the S-Video/Video
Output Connector (23), (28), (33) or (38) on the first
monitor and the S-Video/Video Input Connector (22),
(27), (32) or (37) on the second monitor, and continue
until all monitors are connected.
• Set the S-Video/Video Termination Switch (24), (29),
(34) or (39) of the first and intermediate monitors to Hi-
Z position. Then set the S-Video/Video Termination
Switch (24), (29), (34) or (39) of the last monitor to 75Ω
position.
• Connect the coaxial cable to the Standby Input
Connector (42) when the Standby On/Off mode is
selected by the external signal.
• Connect the coaxial cable between the Standby
Output Connector (43) on the first monitor and the
Standby Input Connector (42) on the second monitor,
and continue until all monitors are connected.
3. Audio Circuit Signal
• Connect the coaxial cable between the Video or S-
Video Output connector of VTR or camera and the S-
Video/Video Input Connector (22), (27), (32) or (37) on
this monitor.
• Connect the audio cable between the Audio Output
Connector of VTR and the Audio Input Connector (25),
(30), (35) or (40) of this monitor, and connect the
audio cable between the Audio Input Terminal of
audio amplifier to the Audio Output Connector (26),
(31), (36) or (41) of this monitor.
• Set the S-Video/Video Termination Switch (24), (29),
(34), or (39) to 75Ω position.
FOCUS
Hiz
OUT
S-VIDEO
IN
AUDIO
IN
INPUT 4
OUT
OUT
VIDEO
IN
AUDIO
IN
INPUT 2
OUT OUT
IN
STAND BY
Hiz
75Ω75Ω 75Ω 75ΩHiz
OUT
S-VIDEO
IN
AUDIO
IN
INPUT 3
OUT
OUT
VIDEO
IN
AUDIO
IN
INPUT 1
OUT
Hiz
75Ω Hiz
75Ω Hiz
FOCUS
Hiz
OUT
S-VIDEO
IN
AUDIO
IN
INPUT 4
OUT
OUT
VIDEO
IN
AUDIO
IN
INPUT 2
OUT OUT
IN
STAND BY
75Ω75Ω 75Ω 75ΩHiz
Hiz
OUT
S-VIDEO
IN
AUDIO
IN
INPUT 3
OUT
OUT
VIDEO
IN
AUDIO
IN
INPUT 1
OUT
Hiz
FOCUS
75Ω 75Ω 75Ω 75ΩHiz
OUT
S-VIDEO
IN
AUDIO
IN
INPUT 4
OUT
OUT
VIDEO
IN
AUDIO
IN
INPUT 2
OUT OUT
IN
STAND BY
Hiz
Hiz
OUT
S-VIDEO
IN
AUDIO
IN
INPUT 3
OUT
OUT
VIDEO
IN
AUDIO
IN
INPUT 1
OUT
Hiz
75Ω Hiz
75Ω Hiz
FOCUS
75Ω 75Ω 75Ω 75ΩHiz
OUT
S-VIDEO
IN
AUDIO
IN
INPUT 4
OUT
OUT
VIDEO
IN
AUDIO
IN
INPUT 2
OUT OUT
IN
STAND BY
Hiz
Hiz
OUT
S-VIDEO
IN
AUDIO
IN
INPUT 3
OUT
OUT
VIDEO
IN
AUDIO
IN
INPUT 1
OUT
Hiz
75Ω Hiz
75Ω Hiz
VIDEO OUT
AC Mains
AC Mains
AC Mains
AC Mains
VTR/Video Disc Player
Camera
Camera
Speaker
Amp
Coax.
Cable
Coax.
Cable
Coax.
Cable
Coax.
Cable
S-VIDEO
OUT
S-VIDEO
OUT
S-VIDEO
OUT
S-VIDEO
OUT
AUDIO
OUT