Panasonic WV-CS850B - Page 7

E Referring to Fig. 2-1-3, disconnect one connector, and
remove three screws that secure the Lower Diecast, and
remove the Lower Diecast Case.
Fig. 2-1-3
R Referring to Fig. 2-1-4, remove four screws that secure
the Inner Dome Cover and pull up the Inner Dome Cover.
Fig. 2-1-4
T Referring to Fig. 2-1-5, loosen one screw and disconnect
one connector.
Fig. 2-1-5
2. Disassembling Procedure
2.1. Disassembling Procedure for Camera
Head
Q Referring to Fig. 2-1-1, turn the Dome Cover to counter
clockwise direction, and remove the Dome Cover.
Fig. 2-1-1
W Referring to Fig. 2-1-2, remove one screw and turn the
Lower Diecast Case to the counterclockwise direction
and remove the Lower Diecast Case.
Fig. 2-1-2
Dome Cover
Turn to
counterclockwise.
Turn to counter-
clockwise.
Remove one screw.
Lower
Diecast
Case
SW1 SW2
Disconnect one connentor.
Remove three screws.
Lower Diecast
Case
Inner Dome
Cover
Remove four screws.
Disconnect one
connector.
Loosen one
screw.
– 2-3 –