Panasonic WV-CS950 - Poor Picture Colour; Image Flicker; Black and White Picture; Frequent Switching Between Colour and B;W Modes

-47-
Problem
Cause and Recommended Action Reference Pages
Poor picture colour
• Is the dome cover or lens of the camera dirty? If so,
clean them.
7
• Use the special setup menu to adjust picture
quality.
39
• Check the white balance setting.
25
Image flicker
• If Super Dynamic 3 is turned on, turn it off.
22-23
Afterimages in
the picture
• Check the DNR setting.
25
Black and white picture
• The camera has an auto black and white switching
mode function. Check the setting of this mode.
25-26
Frequent switching
between the colour and
the black and white
modes
• Adjust the black and white mode switching level,
and the duration time setting.
25-26
White specks in the
picture
• Use the PIX OFF function to perform blemish
compensation.
39
Menu does not open.
• Is the camera connected correctly? See the
operating instructions that come with the system
controller you are using.
—
• Are camera communication settings configured
correctly?
12-14
18-19
20
WV-CS950US05.4.278:54PMページ47
www.absolualarme.com met à la disposition du public, via www.docalarme.com, de la documentation technique dont les références, marques et logos, sont la propriété des détenteurs respectifs