18
Operating procedures
Communications with customers (TALK)
Any store personnel wearing the headset and (or) the Belt Pack can communicate
bidirectionally with any customer who is at the order post.
You will hear a beep in this product when a vehicle arrives at the order post.
When the Talk-Lock mode is preset
1 Press the [T] button.
● A beep is heard from the earphone to confirm that communication has been
established. In this state, you can talk with a customer at the order post by speaking
into the microphone of this product.
2 Press the [T] button again.
● Communication is interrupted and the conversation is ended.
When the Press-To-Talk (PTT) mode is preset
1 Hold down the [T] button.
● A beep is heard from the earphone to confirm that communication has been
established. In this state, you can talk with a customer at the order post by speaking
into the microphone of this product.
2 Release the [T] button.
● Communication is interrupted and the conversation is ended.
[T] button
The Talk-Lock mode and the Press-To-Talk (PTT) mode can be configured in the
setting mode. For further details, refer to pages 34 and 35.
Note
WX-CH455_PGQX2221ZAC1.indb 18 2017/08/21 16:11:09
To Next Page
Loading...
