28
Setting the unit
Canceling the manager mode
1 Rotate the microphone boom of this product you set to manager mode to turn
off the power.
2 Rotate the microphone boom while holding down the [S] and [T] buttons to turn
on the power of this product.
● The power indicator turns red and green alternately.
[T] button
[P] button
Lane indicator
[S] button
Power indicator
3 Press a communication button ([T] or [P] button) while the power indicator turns
red and green alternately.
Canceling manager mode for Lane A
● When the [T] button is pressed, the manager mode is canceled for Lane A. The lane
indicator blinks orange and “Connecting Center Module A” can be heard from the
earphone.
Canceling manager mode for Lane B
● When the [P] button is pressed, the manager mode is canceled for Lane B. The lane
indicator blinks green and “Connecting Center Module B” can be heard from the
earphone.
4 When manager mode is cancelled, the unit returns to the normal condition, and
the power indicator turns green.
● If there is a problem canceling the manager mode settings, an error beep and the
voice message “Failed” are heard from the earphone, and the power indicator blinks
red to alert the user the abnormal state. If that happens, retry from step 1.
WX-CH455_PGQX2221ZAC1.indb 28 2017/08/21 16:11:10
To Next Page
Loading...
