P&E CYCLONE FX - Page 73

User Manual For CYCLONE FX Programmers 68
@parameter featureNum
CYCLONE_GET_IMAGE_SCRIPT_FILE_FROM_FI
LE
@parameter setFeature
Indicates whether the image file has been decoded. If
previous operations has already decoded the file,
then set it to true. Otherwise set it to false.
@parameter paramValue1 Ignored, set it to 0.
@parameter paramValue2 Ignored, set it to 0.
@parameter paramValue3 Ignored, set it to 0.
@parameter paramReference1
A pointer to a null-terminated character string that
contains the name of the script file.
@parameter paramReference2
A pointer to a null-terminated character string which
contains the full path to the specified SAP file.
@returnvalue
True if the script file was read
False otherwise
@parameter featureNum
CYCLONE_TOGGLE_POWER_NO_DEBUG
@parameter setFeature Ignored, set it to false.
@parameter paramValue1 Ignored, set it to 0.
@parameter paramValue2 Ignored, set it to 0.
@parameter paramValue3 Ignored, set it to 0.
@parameter paramReference1 Ignored, set it to null.
@parameter paramReference2 Ignored, set it to null.
@returnvalue
True if the power was toggled.
False otherwise
@parameter featureNum
CYCLONE_SET_ACTIVE_SECURITY_CODE
@parameter setFeature Ignored, set it to true.
@parameter paramValue1
The security code type (e.g. MON08, Renesas, PPC
Nexus 64 bit, PPC Nexus 256 bit ignored, set it to 0).
@parameter paramValue2 The length of the security code bytes.