10
Display a Single Photo on the Full Screen
You can choose a single photo to display on the full screen, without a Slideshow:
1. From the Home screen, choose Photo. The Thumbnails Screen opens. To
“Go Back” press the Home button again.
2. Use the Left (BACK) and Right (FWD) buttons on the Remote Control or the
Digital Photo Frame until the desired photo is highlighted. The photo’s
filename and size are displayed at the top of the screen. The other number
indicates how many screens of photos are in the memory, and which one is
displayed.
3. Press ENTER (Select and View) to display the selected photo on the full
screen.
4. Press the BACK (Left) Arrow to return to the previous photo.
5. Press the FWD (Right) Arrow to display the next photo.
6. Slide from Left to Right to navigate next photo (or to navigate previous photo if
slide from Right to Left).
7. To stop the display and return to the Thumbnail screen, press the EXIT (Back)
button.
To Next Page
Loading...
Need help?
General
