4
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Photo
Frame. This will reduce the risk of fire, electric shock, and injury.
Warning: Do not expose this product to rain or moisture.
Warning: Do not remove the cover. There are no user-serviceable parts inside.
Refer all servicing to qualified personnel.
• The Digital Photo Frame is for indoor use only.
• Unplug the Digital Photo Frame before performing care and maintenance.
• Do not block the ventilation holes on the back of the digital photo frame at
any time.
• Keep your Multimedia Digital Photo Frame out of direct sunlight and heat
sources.
• Protect the power cord. Route power cords so that they are not likely to
be walked on or pinched by items placed on or against them. Pay
particular attention to the point where the cord attaches to the Digital
Photo Frame.
• Only use the AC adapter included with the Digital Photo Frame. Using any
other power adapter will void your warranty.
• Unplug the power cord from the outlet when the unit is not in use.
Cleaning the Digital Photo Frame
Treat the screen gently, it is made of glass and can break. To clean fingerprints or
dust from the LCD screen, we recommend using a soft, non-abrasive cloth such
as a camera lens cloth to clean the LCD screen. If you use a commercial LCD
Cleaning Kit, do not apply the cleaning liquid directly to the LCD screen. Clean the
LCD screen with cleaning cloth moistened with the liquid.
Clean the outer surface of the Digital Photo Frame (excluding the screen) with a
soft cloth dampened with water.
To Next Page
Loading...
Need help?
General
