8
Install and Replace the Remote Control Battery
1. Push the hook to right side with a nib.
2. And, pull the Battery holder.
3. Place a “CR2025” Lithium battery on the tray with the positive “+” end facing
toward you.
4. Close the holder.
Using the Digital Photo Frame’s Screens
You access the Digital Photo Frame’s functions from either the Edge Touch
interface, the buttons located at the top of the picture frame or with the remote
control.
This user guide primarily describes the use of the remote control. Please see the
PanTouch Quick Guide for instructions on using the PanTouch interface.
The HOME Screen
The HOME Screen gives you the following choices listed below.
To Next Page
Loading...
Need help?
General
