INOXPAN S.L. EN - 18
CANCELLING THE PYROLYTIC FUNCTION
Pyrolysis is an automatic function and therefore it can only be activated from the timer programme.
To cancel a pyrolysis in progress it is necessary to reset the oven, following the instructions below:
1.
Set the control dial to the position. The timer display will appear.
2.
Depending on the internal temperature of the oven, either of the two following situations could
arise:
a. Dangerous internal temperature: In this case, the door will remain locked until the temperature
reaches safe levels.
b. Safe internal temperature: If the temperature inside the oven is safe, the door will be unlocked
immediately.
To Next Page
Loading...
