Pandora Mini Moto - Updating Firmware

33
USER AND INSTALLATION MANUAL
Pandora Specialist
• Open the «Check firmware» menu and select
one of the update options («Download
firmware» - upload firmware file from a
server, «File manager» - upload previously
downloaded to the device memory file);
• Select firmware and press the «Update»
button to upload firmware to the base unit.
Pandora Alarm Studio
• Open the «Update Software» window and
select one of the update options («Load from
file» – upload firmware file from a PC folder,
«Firmware archive» – upload firmware from a
server to «Firmwares» folder);
• Select firmware and press the «Update»
button to upload firmware to the base unit.
Updating rmware
It is recommended to update firmware of the base unit before installing and programming the system.
It is required to exit programming mode after settings were changed or firmware was updated.
!
if ThE bOOT mOdE has bEEN iNTErrupTEd fOr sOmE rEasON aNd ThE sTaTus iNdicaTOr lighTs rEd, yOu NEEd TO lOad
firmwarE usiNg quick bOOT mOdE (wiThOuT ENTEriNg ThE piN-cOdE). OpEN ThE paNdOra alarm sTudiO Or paNdOra
spEcialisT applicaTiON; dE-ENErgizE aNd discONNEcT ThE sysTEm; prEss aNd hOld ThE valET buTTON lOcaTEd ON ThE basE
uNiT; rElEasE ThE buTTON immEdiaTEly afTEr cONNEcTiNg ThE usb cablE; ThE sysTEm will ENTEr bOOT mOdE.