CRAC/CRAH Sensor Hardware Installation Manual
- 8 -
l Regular and plenum-rated (purple) zip ties (not shown)
l 3M Command Strips™ (not shown)
Required Software
The environmental server requires the installation of the following SynapSense soft-
ware:
l Web Console™
l MapSense™ (including optional Active Control™ software with MapSense project
*.dlz file exported into the Web Console)
Installation of SynapSense software generally takes place prior to hardware installation,
which prevents redundancy of hardware verification activities. Refer to the SynapSense
Software, Web Console, and MapSense Installation and User Guides for more inform-
ation.
Required Tools and Materials
Table 3 lists the minimum tool and material requirements installers need to bring to the
job site.
Table 3 – Required Tools and Materials
Item Description/Comments
Attire Proper dress and shoes for performing work in a data center (including
areas inside the sub-floor and above ceiling tiles)
Ladder/Step
Stool
To access all areas of the CRAC/CRAH units
Additional
Parts
Spare ThermaNodes and batteries
Laptop To configure settings (for example Modbus gateway)
Fasteners Regular and plenum-rated zip ties, cable clips, and mounting brackets
Tools 7/32” Allen wrench, flashlight, diagonal cutters, utility knife, scissors,
tile pullers, thin blade screwdrivers, torque wrench, pliers, wire strip-
pers, and alcohol wipes
To Next Page
Loading...