B20733-02 Page 38 of 39 08-2022
- Do not use canned air in the interior of the printer as it can blow dust and debris into
sensors and other critical components.
- Only use a vacuum cleaner with a nozzle and hose that are conductive and grounded to
drain off static build up.
- All reference in these procedures for use of isopropyl alcohol requires that a 99% or greater
isopropyl alcohol content be used to reduce the risk of moisture corrosion to the printhead.
- Do not touch printhead by hand. If you touch it careless, please use 99% Isopropyl alcohol
to clean it.
- Always take personal precaution when using any cleaning agent.
- Cleaning Tools
- Cotton swab
- Lint-free cloth
- Brush with soft non-metallic bristles
- Vacuum cleaner
- 75% Ethanol (for disinfecting)
- 99% Isopropyl alcohol (for printhead and platen roller cleaning)
- Genuine printhead cleaning pen
- Mild detergent (without chlorine)
To Previous Page
Loading...
