Panorama plus - Appendix A: PANORAMA Specifications

A: Specifications 8-1
8. Appendix A: PANORAMA specifications
To ensure state-of-the-art products and design, Contex reserves the right to change
specifications at any time.
PANORAMA Model Basic
Plus
Maximum Resolution (dpi):
400 800
Sensors:
Triple linear CCDs
23700 pixels.
X
X
X
X
Variable resolution setting: from 50 dpi in one dpi increments
X X
Capture: 12 bit passing the best 8 bits of graytone data to the
computer
X X
Scan Modes:
8-bit graytone mode for 256 gray levels.
1-bit Black & White line mode
B/W Dual 2D-adaptive mode.
Copy modes with ADL+ Error Diffusion halftoning.
X
X
X
X
X
X
X
X
Scan Speed:
400dpi Turbo
3”/sec 6”/sec
Digital Image Processing:
Dual 2D-Adaptive enhancement processing.
ADL+ error diffusion halftoning–grayshade reproduction.
2D – Background suppression.
2D - Sharpening and Softening.
2D - Adaptive Thresholding.
2D - Edge enhancement.
2D - Graytone blur filter
HW = Image processing feature embedded in the scanner’s hardware
SW = Image processing feature emulated in WIDEimage/JETimage
HW
HW
HW
HW
HW
HW
HW
HW
HW
HW
HW
HW
HW
HW
Media and Scan Width:
Media Width: 6.0 to 51.5" (1310mm.)
Scan Width: 50 Inches (1270 mm.)
Media Thickness: Up to 0.6” (15mm.)
X
X
X
X
X
X
Dimensions: 61.4” wide x 7.3”high x 18.3”deep
(1560 x 185 x 465 mm.)
X X
Interface: Dual Ultrafast SCSI I/Fs,
transfer rate: up to 20 Mb./sec.
X
X
X
X
Light Source: Stabilized fluorescent lamps
X X
Optics: Compact optical path, torsion stabilized for portability.
X X
Power: Consumption:180W,
Voltage:100/115/220/240V-50/60Hz
X
X
X
X
Scanner Maintenance Kit
Maintenance Software, Maintenance Sheet, Instructions
X X
Optional Interface Kit
WIDEimage Software, SCSI Interface Card
X X
Optional Copy Kit: JETimage BASE copy software
Mount for touchscreen and PC
X
X
X
X
Optional Floor Stand with Document Basket
X X