Pantech WH2950 - Page 20

20
Comman
d
Function
Description
Settings
SET + 2
seconds
BEEP
Turns on or off the beep
with each keystroke
Press WIND/+ or PRSSURE/- to
toggle OFF and ON
SET
RST
Reset max/min daily at
12:00am (on) or
manually (off)
Press WIND/+ or PRSSURE/- to
toggle OFF and ON
SET
DST
Observe Daylight
Savings Time
Press WIND/+ or PRSSURE/- to
toggle OFF and ON
SET
ZON
Time Zone (TZ)
Press WIND/+ to increase or
PRSSURE/- to decrease (reference
Figure 15).
SET
24H
12/24 Hour Format
Press WIND/+ or PRSSURE/- to
toggle between 12 hour (12h) and
24 hour (24h) format
SET
HR
Hour of Day
Press WIND/+ to increase.
PRSSURE/- to decrease
SET
MIN
Minute of Day
Press WIND/+ to increase.
PRSSURE/- to decrease
SET
M-D
Month Day Format
Press WIND/+ or PRSSURE/- to
toggle between M-D (month/day)
format and D-M (day/month)
format
SET
Y
Year
Press WIND/+ to increase and
PRSSURE/- to decrease
SET
M
Month of Year
Press WIND/+ to increase and
PRSSURE/- to decrease
SET
D
Day of Month
Press WIND/+ to increase and
PRSSURE/- to decrease
SET
hPa
Barometric Pressure
Units of Measure
Press WIND/+ to toggle between
inHg,mmhg and hPa
SET
PRESSURE
REL
Relative Pressure
Calibration
Press WIND/+ to increase.
PRSSURE/- to decrease. For
details on relative barometric
pressure calibration, reference
Section 错误！未找到引用源。.
SET
W/M
2
Light units of Measure
Press WIND/+ to toggle between
klux, kfc, and W/M
2
SET
°C
Temperature Units of
Measure
Press WIND/+ to toggle
between °F and °C
SET
Km/h
Wind speed units of
Measure
Press WIND/+ to toggle between
km/h, mph, knots, m/s and bft