Panther 1650 - Page 12

PANTHER
MODEL PAGE NO.
1350 / 1650 10
(31) Longitudinal hand feed wheel.
(32) Feed selecting knob.
(33) Feed engaging lever.
(34) Half nut engaging lever.
(35) Thread dial indicator.
(36) Carriage.
(37) Surface slide.
(38) Transverse hand feed wheel.
(39) Compound slide.
(40) Carriage lock bolt.
(41) Tool post.
(42) Tail stock.
(43) Tail stock spindle.
(44) Tail stock spindle locking lever.
(45) Tail stock spindle wheel.
(46) Tail stock clamping lever.
(47) Tail stock setting bolt.
(48) Tool tray.
(49) Motor Rail.
(50) Electric motor.
(51) V Belt.
(52) Arm plate.
(53) Change gears.
(54) Chip tray.