PANTHER
MODEL PAGE NO.
1350 / 1650 11
Fig. No. (1.2) is of four different types of machine constructions.
Depending upon your and machine specification suitable figure is put in
this manual with this part list and part list is common for all four type of
machine constructions, so it may happen that this figure may or may not
indicate all items of this part list.
1.3 List of Accessories.
1.3.1 Standard Accessories :- (to be supplied with machine).
(01) Harden guide ways of lathe bed.(In built)
(02) Electric motor.
(03) Reverse forward switch.
(04) V belts.
(05) Carrier plate.
(06) Centre adapter.
(07) Dead centre – MT – 4, Qty:- 2nos.
(08) Tool post bolt key.
(09) Change gears for inch/mm threading. (For 4 TPI lead screw).
(10) Oil can.
(11) Screw driver.
(12) Allen keys - 5 no.
(13) Fixed spanner - 2 no.
(14) Shear keys - 2 no.
To Next Page