PANTHER
MODEL PAGE NO.
1350 / 1650 12
1.3.2 Optional Accessories (To be order along with machine).
(01) 16 spindle speed with speed selector switch and Reverse
Forward switch.
(02) 8 spindle speed with foot pedal, control panel and starting
third shaft.
(03) 16 spindle speed with foot pedal, control panel and starting
third shaft.
(04) 8 spindle speeds with foot brake, control panel and starting
third shaft only with A2 size 4 or DI size 4 cam lock spindles.
(05) 16 spindle speed with foot brake, control panel and starting
third shaft only with A2 size 4 or DI size 4 cam lock spindle.
(06) 6 mm pitch lead screw in lieu of 4 TPI lead screw.
(07) Electric coolant pumps with tank and fittings.
(08) Rear tool post with tool holders.
(09) Taper turning attachment.
(10) Rear splash guard.
(11) Hydro copying attachment.
(12) Drift type tail stock spindle.
(13) Hydraulic operated centre.
(14) Rake operated centre.
(15) Lever operated cullet adaptor with collets.
1.3.3 Optional Accessories (Retro fitting possible).
(01) Face plate Dia. 340 mm.
(02) Steady rest max Dia. 100 mm pad type.
(03) Follow rest max Dia. 70 mm pad type.
(04) Chuck flange Std / A2 size 4 / DI size 4 cam lock.
(05) Machine lamp.
(06) Quick change tool post with 5 tool holders.
(07) Internal or external or combine tool post grinder with or with
out elect. Motor – 2800 RPM & On – Off switch.
(08) Keyway cutting attachment.
(09) Three jaw self centre chucks.
(10) Four jaw dog chuck.
(11) Revolving centre.
To Next Page