10
3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed error, and
then load the paper into the tray print-side down.The automatic feeder tray can be loaded up to 250
pages, 80g/m² paper.
4. Raise the output tray to avoid the printed paper from slipping and falling, or immediately remove
the printed document after the printing is complete.
Note: • It is recommended that you raise the output tray to prevent the paper from slipping and falling after
printing. If you choose not to raise the output tray, we recommend that you immediately remove the
printed paper from the printer.
• If more than 250 pages (80 g/m²) are put inside the auto feed tray at one time, paper jam or paper
feed failure will be led to.
• If carrying out single-sided printing, please make sure that the side to be printed (the blank side) is
face down.
To Next Page
Loading...
Need help?
General